Not being one to waste an opportunity, I set out to put the counterfeit through its paces. The fake X300U rode along as my EDC for three weeks. Between training, my cleaning regimen, and having to de-gun for work, the counterfeit was drawn and reholstered roughly 800 times.
The first 200 rounds fired were with a gen 4 Glock 19, including 50 Speer Gold Dot 124gr +P.
For the majority of shooting, the knockoff X300U was mounted to my gen 4 Glock 34. Approximately 2,000 rounds were fired with this setup–1,500 of which took place over 3 days during Haley Strategic D5 Handgun.
I also mounted the light to my Springfield Armory MC Operator, firing 110 rounds of Remington UMC 230gr. Interestingly, the battery compartment opens itself under the increased recoil of .45ACP.
The trigger guard of the 1911 prevents the batteries from falling out, but what little weather seal exists is compromised. Surprisingly, the light still functions with the compartment partially open.
There are several functional differences between the counterfeit X300U and the real X300U, in addition to the aesthetic differences noted in my previous article.
The battery compartment on the fake opens extremely easily, especially when mounting the light to a firearm. While not a massive issue when mounting to a pistol, problems start to emerge when using the light on long guns. If nothing is behind this light, then prepare to lose your batteries quickly and repeatedly. Surefire solves this issue with a low profile latch kept under high spring pressure.
When mounting to pistols, especially Glocks, the knockoff X300U frequently needs to be carefully guided into place before locking in. With the real light, the mount easily snaps into place no matter what rail is being used. I have never had the counterfeit fall off of a gun under recoil when not locked in, but the possibility is there.
Upon activating the two lights, there is a substantial amount of play in the switches of the counterfeit X300U before the constant-on beam appears. Additionally, there is an audible click when activating the momentary-on beam of the knockoff. Both of these are noticeably absent on the Surefire.
Aside from the obvious lack of craftsmanship, the counterfeit comes up short in the accessory department. Items missing compared to Surefire include:
When I first turned on the counterfeit light, I was impressed by the brightness of the beam. Inside my home, even during broad daylight, the counterfeit is visibly brighter than a third generation Inforce APL (400 lumens). That being said, the Surefire blows the counterfeit out of the water when it comes to emitted light.
To see how the two compare, I shone each at the farthest distance within my house, 11 yards, in complete darkness. Pictures don’t do the lights justice, but offer a glimpse into their performance. The Surefire bests the counterfeit in nearly every way: larger and brighter spill, larger and brighter hot spot, less segmentation of the beam.
The counterfeit X300U does have one advantage over the Surefire: it doesn’t get nearly as hot. Within a few short minutes, the body of the Surefire becomes too hot to touch, while the counterfeit remains relatively cool. This is likely due to differences in output. Is this much of an issue since these aren’t handheld lights? Probably not, but worth noting.
Overall, the counterfeit light actually seems to be a decent piece of equipment, aside from the battery door issues. Would I take this over an Inforce or Streamlight product? Probably not over Inforce, and definitely not over Streamlight. Even if this ends up being a stellar light, I’d rather have a known quantity, even a less capable one, than something with zero track record.
For free, this light makes me very happy. Any more than that and I’d spend my money on something I know will work when I need it. I will continue to shoot with this light and keep you updated on if/when it finally craps out.
Editor’s Note: Make sure you are buying from a reputable retailer like Big Tex Outdoors, Brownells, or even a seller on Amazon with great feedback. Some of these fakes look very good and you might not know that you have been screwed by a dishonest person.
If you made it this far, thanks for reading! Writing isn’t my full-time profession, and nearly everything I do comes out of my own pocket. Between ammunition, tuition, range fees and more, expenses add up fast. If you like what I have to offer, consider making a donation to my Patreon.
Every bit helps bring more work like this to you, and contributes to shortened timelines or more in-depth work on my part. You’ll also have more direct access to me, offering suggestions for future projects, looking behind the scenes, and getting early access to some content. You can find my Patreon >>HERE<<
Back in 2022 I wrote a series of articles titled "How to Choose a Good…
I'm a pretty big fan of the shotgun. While handgun shooting makes up the majority…
Over the past few years I've had the opportunity to learn from several great instructors.…
The Smith & Wesson Bodyguard 2.0. You already know what it is. It's been heavily…
I've been on a .30 Super Carry jihad for the better part of a year…
A few weeks ago I made my way to the desert to perform some ballistics…
View Comments
Yup Another Man Asking For A Guest Post
Hi there!
I’m Hans Wimberly from gearsadviser.com and we recently published an awesome article, showing some gun safety rules for gun owners, kids and families:
https://gearsadviser.com/gun-safety-rules-that-save-health-and-lives/
As you’ve probably guessed, I’m about to ask if you would let me write a guest post for your site. Why? Because we really deserve it and as you can see from our article... we know what we are talking about!
What’s In It For You?
Here are a few things I can do for you:
- Awesome content to publish from an experienced gun lover for FREE
- We will share the guest post with our social media followers
- We start our working relationship off on a good foot and open the doors for future collaborations!
What do you think?
All the best,
Hans Wimberly